Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Pico Rivera, CA
We’re an independent Ghost Controls repair shop serving Pico Rivera, and we fix these openers every week. The work here looks different because most gates are bolted to stucco-over-block walls from the 1950s through 1970s, so the failure usually starts at the masonry anchor, not the control board. If your Ghost Controls opener is straining, stalling, or dead, we diagnose the whole system, not just the motor. Call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pico Rivera Residents Choose Us for Ghost Controls Service
Ghost Controls openers have their own logic. The control board, arm travel, and battery charging behave differently from a LiftMaster or FAAC, and you can waste hours swapping parts if you treat them all the same. Todd Conway, our lead technician, grew up near Compton Creek watching neighbors fight with sliding gates nobody understood. He learned the fundamentals at Los Angeles Trade-Technical College, then spent close to a decade working gates across the South Bay and Southeast LA before starting Gate Repair Compton in 2014. If you understand the failure, the fix is usually obvious. That’s how we work. Gate repair is all we do, so when we show up in Pico Rivera, we’re not learning your opener brand on your dime. We diagnose by what the equipment is telling us, replace only what failed, and leave you with a gate that closes square.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Pico Rivera
- Solar battery packs that die in the heat. Pico Rivera summers bake everything. A Ghost Controls solar-charged battery that sits in direct sun for a few seasons stops holding a real charge. The gate crawls in the morning and stalls by late afternoon. We test the pack under load and replace it when it’s cooked.
- Undersized actuator arms on heavy iron gates. Original wrought-iron driveway gates in Pico Rivera weigh far more than the opener arms many of them carry. The motor strains, the board faults, and the gate quits mid-swing. The arm isn’t always the fix; the gate often needs hinge work and rebalancing first.
- Corroded low-voltage terminals and sun-faded control enclosures. Santa Ana winds drive dust and rain into control boxes whose plastic has gone brittle after years of San Gabriel Valley sun. We clean the corrosion, re-terminate the wiring, and seal the enclosure so the board stops throwing phantom faults.
- Arm brackets pulling loose from stucco-over-block walls. This is the big one in Pico Rivera. When the masonry anchor lets go, the opener looks broken: it faults, chatters, or just hums. We reset the brackets into solid block with proper anchors. The motor’s fine.
- Photo-eyes and keypads that misalign or stop responding. Heat cycles move gates slightly, and a photo-eye that was aligned in January is now off by half an inch in August. We realign, re-aim, and replace accessories when the internals are gone.
From a single broken hinge to a full electric-gate installation, we’ve handled it. If you’re not sure whether the opener or the gate is the problem, that’s exactly what we’re for.
Ghost Controls Service in Pico Rivera: What Local Conditions Mean for Your Equipment
The defining fact about gate repair in Pico Rivera is that most homes were finished between the 1950s and 1970s, and the driveway gates were hung on whatever was there. On a lot of the older blocks, that means the gate post is actually a stucco-over-block wall, not a freestanding steel post. A Ghost Controls opener mounted to that wall works fine until the anchor bolts fatigue in the aging masonry. Then the arm shifts, the travel limits change, and the opener starts faulting for no apparent reason. A homeowner sees a dead gate and assumes the opener failed. Most of the time it hasn’t. The fix starts at the wall, not the control board. That’s why our Ghost Controls service calls in Pico Rivera usually include checking anchor integrity before we condemn a motor. It saves people from replacing an opener that was never the problem.
Ghost Controls Models & Products We Service in Pico Rivera
We service the mainstream Ghost Controls lineup: heavy-duty single swing gate openers, dual swing openers, solar kits with battery and control box, and the keypads, remotes, photo-eyes, and interconnect cables that tie a system together. We also handle motor repair, battery backup, and hinge and post repair, because a Ghost Controls opener doesn’t fail in a vacuum. It fails because the gate it’s moving has sagged, the battery is spent, or the anchors are loose. When a part needs replacing, we use Ghost Controls OEM control boards, actuator arms, and battery packs where reliability matters most. On keypads, photo-eyes, and cabling, we use quality aftermarket parts when they save you money without cutting safety. We’re not a parts counter; we choose what actually fixes your gate.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Pico Rivera
Most Ghost Controls service calls in Pico Rivera fall into predictable ranges. A diagnostic visit with minor adjustments typically runs $95 to $180. Replacing a solar battery pack or re-terminating corroded wiring usually lands between $150 and $300. Control board replacement, depending on the opener, runs $250 to $500 installed. Actuator arm replacement is $300 to $600. A full opener swap, when repair doesn’t make sense, is typically $900 to $2,200 with labor. The job you’re facing could be simpler or more involved than those ranges. The written estimate sets the final price, quoted and agreed before any work starts. Estimates are free. Call (866) 569-6161 for an exact quote. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Pico Rivera
That’s almost always a solar battery pack that has lost most of its capacity. The morning cool lets it hold just enough charge to move the gate, but by mid-afternoon the heat and the charge-depletion catch up, and the opener stalls. We test the pack under load and replace it with a quality unit that fits your Ghost Controls system. Call (866) 569-6161 to schedule a diagnostic, and we’ll confirm whether it’s the battery or something deeper.
Yes, and this is one of the most common jobs we do here. We reset the arm brackets into solid masonry with anchors that actually hold, re-level the gate, and re-tune the opener travel limits so it runs clean. If the block itself is crumbling, we advise you on the right structural fix before we re-hang anything. Call (866) 569-6161 and we’ll take a look. Estimates are free.
We service the whole Ghost Controls system: keypads, remotes, photo-eyes, interconnect cables, control box, arm, and battery. Accessory failures often get misdiagnosed as motor failures, so we test each part in sequence. If a keypad has failed, we replace it with a quality part that integrates with your Ghost Controls control board. Call (866) 569-6161 for a service visit.
If the control board, battery, or hinges are the problem, repair is usually the right call. If the actuator arm is undersized and has been fighting a heavy original wrought-iron gate for years, we’ll tell you straight that replacing the arm with the same thing will fail again. We don’t upsell openers. We give you the honest diagnosis and let the price of each path do the talking. Call (866) 569-6161 and we’ll quote both options.
The gate leaf has come out of balance, usually because the hinge-side anchor bolts or the hinges themselves have worn loose. On Pico Rivera’s older homes, that often means the masonry anchors in a stucco-over-block wall have pulled free. The opener is compensating for geometry that changed. We reset the anchors, replace worn hinges, and re-tune the opener limits. Call (866) 569-6161 to book a service call.
Service Areas Near Pico Rivera
We serve Pico Rivera and the surrounding communities, including Compton, Torrance, Carson, Lynwood, and Florence-Graham. We also get out to Whittier and South Whittier when people there need Ghost Controls work done. If your gate is acting up and you’re close, call us. We’ll tell you if we can get to you this opening.
Book Your Ghost Controls Service in Pico Rivera Today
If your Ghost Controls opener is faulting, stalling, or dead, call (866) 569-6161. We’ll set a time, show up with the right diagnostic tools, and give you a written price before any work starts. Same-day service is available for repair calls. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We work on the brand you already have.
Written by Todd Conway, Owner at Gate Repair Compton, serving Pico Rivera since 2014.