Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Compton
A sagging driveway gate in Compton isn’t a minor annoyance; it’s the front line of your property’s security. Gate Repair Compton focuses on one trade: fixing gates. We repair manual and electric gates across Compton, from original welded ironwork to modern automated systems, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 569-6161. We answer 24/7. Our team knows the houses here: the stucco bungalows, the settled posts, the gates hung before today’s safety standards existed.
We lead with repair, not replacement. That means when a hinge or control board fails, we look for the targeted fix first. Todd Conway runs our gate-only crew, and every technician understands that a Compton gate protects a driveway, a yard, and a family. Gate repair is all we do.
Why Compton Homeowners Call Gate Repair Compton for Gate Repair
Most of our calls come from homeowners on the residential streets running between Rosecrans Avenue and Alondra Boulevard, where the housing stock dates from the 1920s through the 1960s. Those compact lots mean a front gate sits close to the sidewalk, so a broken latch is visible to anyone passing by. We get that. The question isn’t whether the gate looks good; it’s whether the yard is actually secured.
Our reputation in Compton rests on a repair-first approach. When a customer off Long Beach Boulevard calls about a swing gate that won’t close, our first move is to diagnose what failed, not to pitch a new gate. We carry parts for common brands and fabricate brackets and reinforcements for legacy ironwork that no off-the-shelf kit will match. That local knowledge, combined with direct response to Compton addresses, is why homeowners call us back for their next gate issue. Since 2014, we have served this city as a gate-only specialist.
We work on the brand you already have.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Compton
Wrought iron gate repair in Compton usually means one of three jobs: re-hanging a sagging gate, re-welding a cracked or rusted frame, or re-anchoring a hinge post that has pulled loose from aging concrete. The city’s Spanish Colonial and postwar stucco homes often have original ironwork that was welded on site decades ago. Those gates are heavy, and the posts were rarely set to modern depths. Heat and Santa Ana winds flex the metal over time, which loosens welds and works the post bolts free. A typical hinge or realignment repair in Compton runs $180 to $390, while re-welding a cracked iron frame typically lands between $250 and $600 depending on how much steel needs to be rebuilt.
Re-welding and Frame Repair
Old welded steel gates fail at the corners first. The weld cracks, the gate drops, and the latch stops lining up. We cut out the failed section, clean the surrounding steel, and re-weld the joint with reinforcement. If the original scrollwork is intact, we preserve it. The goal is a gate that matches the rest of the ironwork on the property, not a modern panel bolted in place.
Post Re-anchoring
When a hinge post pulls loose, the gate swings low and scrapes the driveway. We remove the old anchor hardware, drill into the remaining concrete footing, set new anchors, and re-hang the gate level. On Compton lots where the footing has settled, we may add a steel plate to spread the load. This is done before the gate gets re-hung so the repair holds through the next heavy rain cycle.
Metal Gate Repair in Compton
Metal gate repair in Compton covers the full range of steel, aluminum, and chain-link driveway and pedestrian gates found on the city’s small-lot bungalows. The most common call is a metal gate that has rusted at the bottom rail or pulled away from its hinges. We cut out the rusted section, weld in a replacement piece of matching gauge steel, and repaint the repair with a rust-inhibiting coating. A typical rust repair and repaint runs $220 to $480. If the hinge itself is seized or the pin has worn through, replacing the hinge hardware typically adds $90 to $180 per hinge.
Metal gate issues in Compton are rarely just cosmetic. A rusted bottom rail weakens the gate enough that one hard pull can snap the frame, leaving the driveway open. We treat every metal gate call as a security repair, not a touch-up.
Lock and Latch Replacement
A gate that won’t latch is an open gate. We replace worn latch bars, install new keyed locks, and align the strike plate so the gate closes and locks on the first swing. On older iron gates, we fabricate a new latch bar if the original is too worn to hold.
Realignment and Track Work
A sliding metal gate off its track is loud and eventually won’t move at all. We reset the gate on its rollers, replace bent or rusted track sections, and re-square the frame so the gate travels smoothly. This matters on Compton properties where the driveway gate opens multiple times a day.
Trusted Brands We Service in Compton
We service operators and hardware from DoorKing, Elite, Mighty Mule, and LiftMaster, along with several other major brands. That matters in Compton because so many gates were installed at different times by different contractors. A DoorKing operator from the 1990s and a Mighty Mule unit installed last year need different diagnostic logic. Our technicians know the brand-specific failure patterns and bring the right parts for the job. For Compton customers, that means fewer return trips and a faster fix. We stock common boards, remotes, and safety photo eyes locally so a typical operator repair happens in one visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Compton Homes
- Worn hinge posts pulling out of aging concrete footings. The original concrete on a 1940s or 1950s Compton bungalow has been through decades of heat, rain, and minor shifting. When the post anchor loosens, the gate sags and the latch misses. We re-anchor the post and re-hang the gate level.
- Obsolete control boards in legacy operators. Old DoorKing and LiftMaster boards stop reading keypad codes or loop detector signals. Some can be reprogrammed; many cannot. We tell you honestly whether a new board is the right fix or whether the whole operator should be replaced.
- Rusted steel frames from sun and Santa Ana winds. Unpainted iron and worn powder coating both fail in Compton’s dry heat. Rust thins the metal until a hinge tears free or a weld cracks. We cut, weld, and coat so the repaired section won’t rust out again next season.
- Warped wooden gates on older frame fences. Rare but heavy winter rains swell the wood, then the dry heat shrinks it. The gate twists and won’t close square. We reset the hinges, plane or replace the affected stile, and brace the frame so it stays square.
Pricing for Gate Repair in Compton, CA
Gate repair costs in Compton run from about $180 for a simple hinge or latch fix up to $600 or more for a full re-weld and re-hang of a heavy wrought-iron gate. Electric gate repair, including a new control board or safety photo eye, typically runs $300 to $750 depending on the operator brand and the age of the wiring. A complete post re-anchoring, where the footing itself is compromised, starts around $350 and rises if the concrete needs to be cut and re-poured. These are typical ranges for this market, not a flat rate. We quote the exact price in writing before any work starts. The estimate is free. Call (866) 569-6161 and we will come measure, diagnose, and price the job honestly.
We Also Serve Cities Near Compton
Our crews cover Compton and the surrounding area, including Carson, Lynwood, Watts, and Torrance. If your property sits near the city line or you manage a rental on the edge of Compton, we can usually route a technician to you the same day. Call (866) 569-6161 and tell us the street; we will confirm coverage when we book the visit.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Compton
Most sagging gates can be fixed. The usual cause is a worn hinge pin or a hinge post pulling out of its footing, and both are repairable. We re-anchor the post, replace the worn hinges if needed, and re-hang the gate so the latch catches cleanly. Replacement only makes sense when the steel frame itself is rusted through in multiple places or the gate has bent from an impact. Call (866) 569-6161 for an on-site look. The estimate is free.
It may, but not always. Sometimes the issue is a dead keypad battery, a tripped breaker, or a failed safety photo eye. On older DoorKing or LiftMaster boards, component failure is common and the board cannot be reprogrammed for modern safety controls. We test the input signals before recommending a board replacement. If a new board is needed, we quote the part and labor before any work starts.
It depends on the operator’s age and condition. If the motor, gearbox, and arm are sound, adding a new safety photo eye and a compatible control board usually costs less than replacing the entire operator. If the board is obsolete and the motor is near the end of its service life, putting new controls on a dying motor is wasted money. We tell you which path costs less over the next five years, not just today. Call (866) 569-6161 for a straight answer.
Yes. We cut out the rusted section, match the gauge of the original steel, weld in a replacement piece, and grind the joint smooth. The original scrollwork and decorative details stay intact. We finish with a rust-inhibiting primer and paint to match the surrounding finish. This is a standard repair on Compton’s older Spanish Colonial homes where the ironwork predates everything else on the property.
We drill through the existing post base into the surrounding concrete, set new mechanical anchors or epoxy anchors, and bolt the post back down. If the concrete around the post is cracked, we cut and patch just that section, not the whole driveway. On older Compton footings that have settled, we may add a steel plate to spread the load. The gate gets re-hung level and tested before we leave. Call (866) 569-6161 for an exact quote.
Written by Todd Conway, Owner at Gate Repair Compton, serving Compton since 2014.