Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Compton Homeowners
New gate installation in Compton comes down to three things: the right measurements, the right operator, and posts sunk to proper footing depth. We handle all three. Our team installs manual and automated gates for driveways, side yards, and commercial properties across Compton. Led by Todd Conway, our crew has worked on Driveway Gate Installation and Gate Opener Installation jobs throughout the South Bay and Southeast LA since 2014. Call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Automatic Gate Installation
Automatic Gate Installation is what we do when a property owner wants the convenience of opening and closing a gate without leaving the car. It pairs a gate panel with an electric operator, safety sensors, and a keypad or remote system. Compton properties with long driveways or street-facing yards get the most value from it, since the gate becomes a working barrier instead of a decorative one. Costs depend on the operator brand and the length of the power run, but most automatic gate installs in Compton fall between $3,400 and $8,500. We quote the full price before any work starts.
Operator Match to Gate Weight
Undersized openers fail early. We match the motor to the actual weight and cycle rate of the gate, not the brochure number.
Safety Loop and Edge Integration
Automated gates need photo eyes and reversing edges. We wire both so the gate stops and reverses on contact, which matters on any shared driveway.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the full build: removing an old gate, setting new posts, hanging the panel, and installing the operator if one is part of the job. We do this for wood, steel, aluminum, and vinyl gates on Compton homes and small commercial lots. The scope changes with the existing layout. A simple swing gate replacement on good posts starts around $1,400, while a full driveway system with operator and keypad runs $3,400 to $8,500. Every estimate is written and itemized, so you know the line items before you approve anything.
Removal and Post Work
We remove the old gate and hardware, then set new posts to proper footing depth for the soil and gate weight. No shortcuts on the part that holds everything up.
Manual or Powered, Done Complete
We build the gate you want now, and if you decide to automate later, the hinge and post setup is ready for an operator.
Electric Gate Installation
Electric Gate Installation takes a manual gate and adds the motor, control board, and access devices that make it move on its own. It is common in Compton where homeowners want controlled entry without replacing an otherwise solid gate panel. We install electric gate systems from scratch and also automate existing gates when the hinges and posts are still sound. Typical pricing runs $2,600 to $7,200 depending on whether we are using a new panel or reusing yours, and how far the conduit has to travel. The written estimate locks the number before the first tool comes off the truck.
Control Options
Remote, keypad, intercom, or app control; we wire the system for the access you want and leave the programming clean.
Existing Gate Automation
If your panel swings true and the posts are solid, we can add a motor and safety package without tearing out the gate itself.
Driveway Gate Installation
Driveway Gate Installation is the fastest way to turn an open curb cut into a controlled entry point. Compton’s residential blocks, especially around Willowbrook and Richland Farms, have a lot of street-facing driveways that benefit from a gate for privacy and security. We measure the driveway width, check the slope, and order or fabricate a panel that clears the ground without dragging. Most driveway gate installs land between $1,800 for a single manual swing panel and $8,500 for a full automated slide system. The estimate is free and the price is agreed before work begins.
Slope and Swing Clearance
Driveways that pitch toward the street need a gate that swings uphill or slides. We check the slope first so the gate opens cleanly season to season.
Side Yard Entry Gates
Narrow side returns get the same attention: proper post depth, tight hinges, and a latch that does not rattle in the wind.
Sliding Gate Installation
Sliding Gate Installation is the right answer for Compton properties where a swing gate would eat too much driveway space or hit a parked car. The panel moves sideways on a track with roller trucks instead of swinging out. It works well on flatter lots and wider driveways, and it pairs naturally with an electric opener. Sliding systems are heavier than swing gates, so the concrete base under the track has to be done correctly or the gate binds within a year. Typical Compton slide gate installations run $3,200 to $8,000. We quote the whole job, including the track and operator, up front.
Track and Roller Setup
The track carries real weight daily. We set it level, anchor it properly, and use rollers rated for the panel weight.
Cantilever or Wheeled
Depending on the site, we recommend a cantilever design that keeps the track clear of debris or a wheeled gate with a box track.
Gate Opener Installation
Gate Opener Installation is about getting the motor, arm, and controls onto an existing or new gate so it responds when you press the remote. We install openers on swing and slide gates for Compton homes and commercial properties. The work includes mounting the operator, running power, wiring the safety devices, and programming remotes and keypads. Opener-only installation typically costs $1,200 to $3,800, including the unit and labor. If the opener is part of a full gate build, it folds into the larger project estimate. We set the price before we start, so there is no surprise at the end.
Power Run and Conduit
We run the electrical from the panel or an existing outdoor outlet to the operator, in conduit rated for exterior use.
Remote and Keypad Programming
Before we leave, every remote, keypad, and intercom station is programmed and tested through several open and close cycles.
Gate Fabrication
Gate Fabrication is the build-to-spec side of our work: we make a gate to fit an unusual opening, match an existing fence style, or handle a weight and use case that stock panels do not cover. Compton has a mix of older wood fences and newer steel railings, so a custom panel often looks better than a prefabricated one bolted into place. We measure, build, hang, and finish. Custom fabricated swing gates in Compton typically run $1,900 to $5,500 depending on material and size; slide gates run higher. The final price is set in a written estimate before fabrication starts.
Steel and Aluminum Builds
We build with steel for strength and aluminum where weight or rust is a concern. The frame is welded or mechanically fastened, then fitted to the opening.
Matching Existing Fence Design
A new gate should not look like an afterthought. We match top rail height, picket spacing, and finish so the gate belongs to the fence.
Brands We Service
We work on DoorKing, LiftMaster, and Mighty Mule equipment regularly. DoorKing slide gate operators show up on a lot of Compton commercial and multi-unit properties, and we know their control board and limit switch setup well. We also install DoorKing openers on new slide gates.
LiftMaster produces dependable swing and slide operators, and we service and install their residential and light-commercial lines. Mighty Mule is popular on farm-style and residential swing gates, and we know where those units wear out, from the arm to the control box. Whether you have one of these brands or any other make, we can help get it installed and running.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate sags or drags. A gate that scrapes the ground is tearing up its own hinges and putting strain on the opener. Left alone, the panel or the motor fails.
- The opener hums but the gate does not move. That hum usually means a capacitor or gear problem. Continued attempts can burn out the motor entirely.
- The gate reverses on its own or stops mid-travel. Safety sensors may be out of alignment, or the force setting is off. A gate that stops unexpectedly can trap a car or person.
- The keypad or remote works only part of the time. Intermittent access control usually points to wiring, a board issue, or a failing receiver. Waiting until it quits completely leaves you locked out or locked in.
- The posts are leaning or the concrete is cracked. The gate structure is compromised. Power washing or repainting will not fix a footing that is moving, and a down gate can damage vehicles or fencing.
Our Process, Step by Step
- 1
Call and describe the gate. We ask about the opening width, whether the gate swings or slides, and what kind of operator you have. That lets us bring the right tools and parts on the first trip.
- 2
On-site measure and estimate. We come to your Compton property, measure the opening, check the posts and power access, and write a line-item estimate. You approve the price before any work starts.
- 3
Removal or prep. We take out the old gate and hardware if this is a replacement, then set posts or prep footings at the proper depth for the soil and gate weight.
- 4
Install the gate and operator. We hang the panel, mount the motor, run the power, and wire the safety edges and photo eyes. Alignment is tested through repeated cycles.
- 5
Programming and walkthrough. Remotes, keypads, and intercoms get programmed. We show you how the manual release works and leave the gate running the way it should.
How Much Does Gate Installation Cost in Compton?
A typical manual gate installation in Compton runs $1,400 to $2,600 for a single swing panel on existing posts. Adding an operator brings the job to $2,600 to $7,200. A full automatic driveway system, including the panel, operator, safety devices, and keypad, usually lands between $3,400 and $8,500. Sliding gates cost more than swing gates because of the track work and heavier hardware. The main price drivers are gate size, material, whether we are reusing existing posts, and how far the electrical has to run. To avoid overpaying, get a written estimate that separates materials from labor and do not accept a verbal number over the phone as a final price. Our estimates in Compton are free, itemized, and binding once you approve them.
Our Service Area Near Compton
Our Compton team also covers nearby communities, including Torrance and Carson, plus Lynwood, Florence-Graham, Watts, and Pico Rivera. Most gate installation jobs within the immediate Compton area are scheduled within a few days of the site visit. For service elsewhere in Southeast LA, we plan the dispatch from our central location and fit the work into the same week. If you are in one of these areas and wondering if we can reach you, call us. We answer 24/7.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Compton
Gate installation is the process of measuring an opening, setting posts, hanging a gate panel, and adding the operator and access controls if an electric system is part of the job. It covers manual gates, automatic gates, and full driveway systems. A professional install includes proper post depth and hinge alignment, which determines how long the gate lasts.
Most standard residential gate installations in Compton take one to two days. Custom fabrication, concrete work, or a long power run can add another day or two. We schedule the work only after the estimate is approved, so you know the timeline before we start.
Manual gates typically run $1,400 to $2,600, electric gate installs land between $2,600 and $7,200, and full automatic systems range from $3,400 to $8,500. Sliding gates and custom fabrication sit at the higher end. The written estimate is the final number, and we do not start work until you approve it. Call (866) 569-6161 for a free, itemized quote.
Yes, we install and service LiftMaster residential and light-commercial gate operators. LiftMaster is one of the brands we see most often on Compton driveways, and our technicians know its swing and slide lineups. Whether you have a new LiftMaster unit or an older model, we can handle the install and programming.
For installation, we schedule a free on-site measure first so the estimate reflects the actual opening, posts, and power access. We do not promise same-day installation, because most jobs require materials and a prepared footing. But we can often get the site visit scheduled fast. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
We stand behind our workmanship on every installation and pass through the manufacturer’s warranty on the operator and hardware. If something we installed fails, we come back and make it right. The specifics are written into your estimate so there is no ambiguity.
Clear the area around the gate opening and make sure we have access to the electrical panel or outdoor outlet. Move vehicles out of the driveway so we have room to work. If you have a fence line or post we are reusing, let us know about any previous gate problems so we can check the structure before we build on it.
Schedule Your Gate Installation Service in Compton Today
A new gate changes how your property functions, and it starts with a free on-site estimate. Call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We will measure, quote a firm price, and get your gate installed right.
Written by Todd Conway, Owner at Gate Repair Compton, serving Compton since 2014.