Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pico Rivera, CA
Gate installation in Pico Rivera usually means working with what’s already there: a 1950s stucco-over-block wall, a narrow driveway, original iron hardware that has been carrying weight for half a century. Most homes here were finished between the 1950s and 1970s, and the gates fronting them are often the same age. We’re Gate Repair Compton, a gate-only specialist, and we handle the full lifecycle: repair, automation, and new installation. Call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pico Rivera Homes Are Different
Pico Rivera is a densely built mid-century tract suburb, and that density shapes how gates fail here. Lots are narrow, driveways sit close to the sidewalk, and most gates are mounted to stucco-over-block walls rather than freestanding posts. When a driveway swing gate starts to sag, the problem is rarely just a worn hinge. On the older blocks, the anchor bolts in aging masonry have pulled loose, which means the fix involves re-anchoring to the wall, not swapping a bracket.
The housing stock is overwhelmingly single-story, built from the 1950s through the 1970s. Original wrought-iron, steel, and chain-link gates are common, along with stucco block walls with built-in gate openings. Hardware is often original, corroded, and undersized for the swing loads it now carries. Hot, dry San Gabriel Valley summers bake finishes and warp wood and vinyl. Seasonal Santa Ana winds put lateral stress on tall iron and driveway gates, loosening hinges and posts over time. This is retrofit territory. The repair conversation in Pico Rivera is about salvaging and re-hanging 40-50 year old iron and hardware, not new installations, which is a different trade than what you’d find in newer Inland Empire subdivisions.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pico Rivera Services
Most calls from Pico Rivera fall into two categories: a gate that won’t swing or latch properly, and an automated gate that has stopped responding. Each has its own page here, because the diagnostic work is different.
Gate Repair in Pico Rivera
Gate Repair in Pico Rivera covers manual gates: sagging driveway swing gates, rusted chain-link pedestrian gates, broken hinges, latch problems, and posts that have shifted in the dry soil. On Pico Rivera’s older blocks, most of these gates hang from stucco-over-block walls, so the repair often means re-anchoring hardware into masonry rather than just tightening bolts. We match the existing metal and hardware style so the repair doesn’t look like a patch job on a 50-year-old fence line.
Electric Gate Repair in Pico Rivera
Electric Gate Repair in Pico Rivera deals with the automation side: openers that hum but don’t move, remotes that stopped working, safety edges that need replacing, and gates that reverse for no reason. Many of these systems were retrofitted onto gates built before automation existed, so the mechanical side and the electrical side don’t always match. We diagnose across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the fix follows the brand’s own logic.
Gate Installation in Pico Rivera
New gate installation in Pico Rivera is usually a replacement job. A 1960s driveway gate has reached the end of its service life, or a homeowner wants to add automation to a gate that was never designed for it, or a chain-link pedestrian gate has rusted past the point where repair makes sense. The job is different here than in newer subdivisions because the mounting surface is usually a masonry wall that was poured before modern anchoring standards existed. We measure the opening, check what the wall and hinges can actually carry, and build the new gate to fit the existing structure, not the other way around. That’s the whole approach behind our Gate Installation work.
Automatic Gate Installation
Signs you need it
A manual gate that gets opened by hand multiple times a day, especially when it’s heavy iron on a sloped driveway, is the clearest sign that automation will pay for itself quickly.
What it costs in Pico Rivera
Automatic gate installation in Pico Rivera typically runs $2,800 to $7,500 depending on operator type, gate weight, and whether new wiring needs to be pulled from the house.
How we do it
We set the operator to match the gate’s swing direction and weight, mount the control box, run power and low-voltage wiring, install safety edges and photo eyes, and program remotes and keypads before testing the full cycle.
Driveway Gate Installation
Signs you need it
A driveway gate that drags on the ground, has hinges pulling out of the wall, or needs a new post because the old one is rotted or loose is past the repair point.
What it costs in Pico Rivera
A new driveway gate in Pico Rivera, manual or automated, typically falls between $2,800 and $7,500 depending on material, width, and whether the existing posts can be reused.
How we do it
We remove the old gate, inspect the posts and wall anchors, reset or replace posts to proper footing depth, hang the new gate with hinges sized for the full weight, and adjust the latch or operator so it closes cleanly.
What Gate Installation Costs in Pico Rivera
| Item | Typical range in Pico Rivera |
|---|---|
| Manual driveway gate, steel or aluminum | $1,500 – $4,200 |
| Automatic driveway gate with operator | $2,800 – $7,500 |
| Full gate system with new posts and wiring | $3,500 – $8,500 |
Prices are estimates. The written estimate sets the final price, and we quote and agree on the number before any work starts.
How long does gate installation take in Pico Rivera?
Most Pico Rivera installations finish in one day for a simple gate replacement, or two to three days when new posts, concrete, and wiring are involved. We confirm the timeline in writing before we start.
Do I need a permit for a new gate in Pico Rivera?
Most cities require a permit when new posts go into the ground or when electrical wiring is run to an operator. Ask Pico Rivera’s building department, and we’ll handle the measurements and specs they ask for.
Brands We Service in Pico Rivera
We work on the brand you already have. That means DoorKing, Elite, Mighty Mule, and LiftMaster systems are all familiar territory, along with five other major names. We stock common boards, remotes, safety edges, and hinges locally so most repairs don’t wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Hinge replacement | $150 – $400 |
| Sagging gate realignment | $200 – $500 |
| Latch or lock replacement | $120 – $320 |
| Chain-link pedestrian gate replacement | $300 – $800 |
| Operator troubleshooting and repair | $250 – $650 |
| Circuit board replacement | $350 – $900 |
| Safety sensor replacement | $180 – $450 |
| Manual driveway gate, steel or aluminum | $1,500 – $4,200 |
| Automatic driveway gate with operator | $2,800 – $7,500 |
| Full gate system with new posts and wiring | $3,500 – $8,500 |
What pushes price up in Pico Rivera is usually the wall. When a gate is mounted to stucco-over-block and the anchors have pulled loose, we’re repairing masonry, not just metal. The price is quoted and agreed before any work starts, and the written estimate is the number you’ll see on the invoice.
Neighborhoods We Serve in Pico Rivera
We cover the whole city, from the older tract blocks near Whittier Boulevard to the neighborhoods off Rosemead Boulevard and the streets south of Washington Boulevard. Most Pico Rivera neighborhoods are within a short drive of each other, so our first visit usually happens the same day you call.
- Central Pico Rivera
- North Pico Rivera near Whittier Boulevard
- South Pico Rivera off Washington Boulevard
- West Pico Rivera near Rosemead Boulevard
- East Pico Rivera near the Rio Hondo
Service Area – Cities Near Pico Rivera
We also cover the surrounding area. If you’re in Whittier, CA, South Whittier, CA, Monterey Park, CA, or Lynwood, CA, the same team handles your gate, with the same pricing structure and the same upfront written quote.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pico Rivera
Fast dispatch from 7am to 7pm, Sunday through Friday. Most Pico Rivera calls get a same-day first visit because the city is compact and we keep common parts in local stock. Call (866) 569-6161. We answer 24/7.
Some Pico Rivera neighborhoods have HOA design guidelines, particularly for front-facing driveway gates. Check your HOA documents before choosing a material or height. We’ll build to whatever spec your association approves.
Yes. When a new operator needs a dedicated circuit or low-voltage wiring from the house to the gate, we handle the full run. The job is quoted as one price, agreed in writing before work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Pico Rivera Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Elena Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Elena Flores"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Jessica Chen