Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Pico Rivera
An electric gate that won’t open or close in Pico Rivera isn’t something you can put off. It blocks your car, leaves your yard exposed, or traps you at the worst moment. We get it. Our team serves Pico Rivera with focused electric gate repair, and most calls get a technician out the same day. Call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Most Pico Rivera homes were built between the 1950s and 1970s, and a lot of them still have the original gate hardware. That means we spend our days here working on sagging driveway swing gates, aging operators, and control boards that went obsolete years ago. The repair conversation in Pico Rivera is usually about salvaging good iron and re-hanging it properly, not selling you a whole new setup. We know the difference because gate repair is all we do.
Why Pico Rivera Homeowners Call Gate Repair Compton for Electric Gate Repair
We work on the brand you already have, which matters a lot in Pico Rivera. This isn’t a newer Inland Empire subdivision where every gate is five years old and under warranty. Homes here carry four to six decades of hardware history, and the fix often means matching an older opener to the gate that’s already there. Automated or manual, we handle it.
Our involvement with the area means we know how these 1950s-1970s tract homes were built. Narrow lots, stucco-over-block walls, original wrought-iron and chain-link. That shapes every repair call. When a Pico Rivera homeowner tells us their gate sags and the opener strains, we already have a good idea what we’ll find before we pull up.
Led by Todd Conway, our gate-specialist team stays brand-agnostic. DoorKing on one block, Elite on the next, Mighty Mule across the street. We diagnose by how each system is supposed to behave, not by guessing. From a single broken hinge to a full electric-gate installation, we cover the whole range without trying to be a general handyman on the side.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Pico Rivera
Electric Gate Motor repair in Pico Rivera is the core of our work here. Your motor is the muscle that swings or slides the gate, and when it fails, the whole system stops. In this area, we see motors that have been in service for 15 to 25 years, often working harder than they should because the gate itself has dropped or the hinges are failing.
What the Job Involves
We remove the motor cover, check the drive gear, limit switches, and wiring connections, and test the capacitor and control board inputs. A typical motor repair in Pico Rivera runs $280-$520. If the motor is beyond saving, a replacement motor and fitting usually lands between $450 and $900 depending on the gate size and brand.
What We Look For First
Before blaming the motor, we check the gate itself. On Pico Rivera’s older blocks, a sagging gate forces the motor to work against extra resistance every single cycle. That’s why we inspect the hinges, anchors, and track first. Fixing the mechanical problem often gives the motor years more life.
Gate Access Control in Pico Rivera
Gate Access Control in Pico Rivera means keypads, remotes, intercom systems, and safety sensors working together so your gate opens for who you want and stays closed for everyone else. Older systems here still run on hardwired keypads and radio remotes that drift or fail outright.
Keypads and Safety Sensors
Keypad repair almost always comes down to weather-sealed contacts or signal wiring that’s gone weak after years in the sun. Safety sensor repair is more urgent: a photocell that’s misaligned or dead means the gate won’t reverse for a person or car in the way. In Pico Rivera, sensors get knocked out of line when a gate sags away from the wall. Keypad work typically runs $100-$180; sensor replacement or realignment runs $120-$220.
Retrofitting Legacy Systems
Most Pico Rivera access control systems were installed long before modern entrapment protection became standard. We can usually retrofit a new receiver, keypad, or photo-eye set onto the existing operator without ripping everything out. That’s the smarter path on a 50-year-old gate where the iron is still sound.
Trusted Brands We Service in Pico Rivera
We’re factory-familiar with the brands Pico Rivera homes actually have. LiftMaster, DoorKing, Elite, Mighty Mule, and several others. Our team works across manufacturers, so the diagnosis isn’t limited to whatever one product line happens to sell this year. We stock common parts and can typically have what’s needed on the truck for a Pico Rivera job. That cuts down the back-and-forth, so your gate gets moving again without waiting on a shipped part. For our part, we bring the multi-brand fluency and the parts discipline that older gates demand.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Pico Rivera Homes
- Sagging swing gates where the anchor bolts have pulled out of the stucco-over-block wall. A hinge swap alone won’t hold; the masonry anchors themselves need re-setting before the gate can carry its own weight again.
- Original operators with dead safety photocells. Gates installed before the UL 325 entrapment standard went into effect often have no working photo-eyes, which is both a safety problem and a code compliance question today.
- Sun-baked iron and heat-cycled wood that warps and loosens. Hot, dry San Gabriel Valley summers take a toll, and seasonal Santa Ana winds push tall driveway panels sideways, working hinge posts and footings loose over time.
- Obsolete control boards no longer supported by parts suppliers. On many Pico Rivera gates the motor is fine but the board is a dead end. We can identify that quickly and offer a new board or a retrofit before you spend more on patch repairs.
Pricing for Electric Gate Repair in Pico Rivera, CA
Electric gate repair in Pico Rivera typically runs $120 for small fixes like keypad or remote work, $280-$520 for motor and control board repairs, and $450-$900 for a full motor replacement. If the gate itself needs re-hanging, plan on $200-$400 for labor plus any new hinges or posts. The written estimate we give you before work starts is the price, fixed and agreed. No surprise invoices after the job. Call (866) 569-6161 for a free estimate. We answer 24/7.
We Also Serve Cities Near Pico Rivera
Our electric gate repair team works throughout the San Gabriel Valley and nearby areas. If you’re in Pico Rivera, you’re in our core service area, and we also cover Whittier, South Whittier, Monterey Park, and Lynwood. Gate Repair Compton is our home base, and we dispatch to all of these communities from there. If you’re on the edge of town or just over the line, call and we’ll do our best to get you on the schedule.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Pico Rivera
Almost always, it can be fixed. Most Pico Rivera driveway gates hang from anchor bolts set into stucco-over-block walls, and when those anchors pull loose, the gate drops and the opener works against the weight. We re-set the masonry anchors and re-hang the panel. In our experience on a 1960s block off Mines Avenue, a LiftMaster-equipped swing gate was dragging its photocell beam off alignment because three anchor bolts had pulled from the original stucco wall. We re-set the anchors, re-hung the gate, and reset the operator limits. The homeowner kept the original iron and opener. If the gate itself is rusted through or bent, that’s another matter, but sagging is usually anchors, not the gate. Call (866) 569-6161 for an exact quote. Estimates are free.
Yes. Modern safety standards require entrapment protection on automatic gates, so a gate that predates the requirement is behind current code. The practical fix is to retrofit photo-eyes onto the existing operator. We do this regularly on Pico Rivera gates from the 1950s through the 1970s. The work involves mounting the sensors, running the wiring, and setting the reverse sensitivity on the operator. It’s one of the more important upgrades we make, because a gate that can’t sense a person or car in its path is a serious hazard. Call (866) 569-6161 and we’ll check your gate and give you a written price.
Yes, and this is one of our core strengths in Pico Rivera. A well-built wrought-iron gate from the 1960s is often better steel than what’s sold new today. If the gate is structurally sound, we can fit a new operator, new photo-eyes, and a new keypad onto the existing panel and keep the original iron. The motor doesn’t care how old the gate is; it cares how well the gate is hung. We re-set the anchors, re-hang the gate, then match the operator to the swing weight. Call (866) 569-6161 for a free estimate on a retrofit.
The easiest tell is what the gate does when you press the remote. If you hear a click or a hum but nothing moves, that usually points to the motor or capacitor. If the gate moves but doesn’t stop where it should, or it opens when you tell it to close, that’s more likely the control board or limit switches. We test components individually, so you’re not paying to replace a motor when a $180 board repair would have done it. In Pico Rivera, we see a lot of boards from the 1990s that are simply obsolete. We’ll tell you honestly when a retrofit costs less than nursing an old board along. Call (866) 569-6161 for a diagnosis.
Yes. We service and retrofit keypad entry, remote controls, and access control systems on gates of any age. On older Pico Rivera gates, the keypad is often hardwired and the wiring has gone weak from decades of heat. We can repair the existing keypad, replace it with a weather-sealed model, or add a wireless receiver if you want remote access from a phone. Access control on an older gate is not a lost cause; it just needs a technician who understands how the old wiring was laid out. Call (866) 569-6161 and we’ll walk you through the options. Estimates are free.
Written by Todd Conway, Owner at Gate Repair Compton, serving Pico Rivera since 2014.