Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lynwood
When an electric gate stops opening in Lynwood, you need a team that understands local gate construction. Most driveway and security gates across Lynwood’s 90262 blocks were welded in place between stucco walls and shared fences, because the openings are too narrow to lift a finished panel out. That means a motor or hinge repair often starts with cutting and re-welding the gate in position, not swapping parts. Gate Repair Compton handles that reality every week. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 569-6161 for a free estimate.
Why Lynwood Homeowners Call Gate Repair Compton for Electric Gate Repair
Gate repair is all we do. Our technicians arrive in Lynwood already familiar with the housing stock: mostly 1940s to 1960s one-story stucco tract homes on narrow lots, long driveways, and gates hung between wood and block walls. Homeowners call us because we diagnose by brand-specific logic across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We work on the brand you already have. When a Lynwood property manager or homeowner calls, they get a technician who has seen this exact gate configuration before: the tight opening, the shared post, the rusted weld at the ground line.
Our customers in Lynwood often find us through neighbors. A gate that drags or a motor that hums but won’t open affects every home on the block, because many properties share fence lines and gate sightlines. We have built a strong local reputation by getting the gate working again fast, without pushing a full replacement when a targeted repair will do. That repair-first mindset matters in Lynwood, where a custom ornamental gate cannot simply be unbolted and taken to a shop.
Todd Conway leads our team with deep experience in gate automation and repair. Under his direction, we have remained focused on one trade since 2014. That focus shows up in our parts inventory, our diagnostic speed, and the way we communicate a repair plan before touching a weld or a wire.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair in Lynwood
Automatic Gate Repair in Lynwood usually means one of two situations: a swing gate that has sagged and now drags, or a slide gate that jumps, grinds, or refuses to move. In Lynwood, the sag rarely starts at the panel. Mature parkway trees and settling soil push hinge posts out of plumb, so the gate hangs wrong even when the frame itself is straight. We correct the post first, then address the operator, the hinges, and any re-welding the opening needs. A typical automatic gate repair in Lynwood runs $225 to $545, depending on how much in-place metal work the job requires.
What a Lynwood Repair Visit Involves
We start with the gate’s physical movement. A gate that is out of plumb will overload any operator, so we check hinge posts, ground clearance, and the condition of welded stiles before condemning a motor or a control board. On narrow Lynwood driveways, much of this work happens in tight quarters between shared block walls, where the gate cannot be removed. That is normal for us.
Once the mechanical side is sound, we test the operator, keypad, remote receivers, sensors, and any loop detector. The goal is a gate that opens and closes the way it did when it was first installed, silently and on command.
Seasonal Sticking and Drag
Lynwood’s inland LA Basin climate is predictable: dry summers bake wooden gate leaves and dry out hinges, while winter rains and marine-layer damp find every rusted weld on older iron gates. Gates that were re-welded in place start sticking and dragging on schedule each season. We see this pattern constantly in Lynwood and plan repairs around it, rather than masking it with a stronger operator that just pushes a binding gate harder.
Electric Gate Motor in Lynwood
An Electric Gate Motor in Lynwood works harder than most homeowners realize. The inland heat bakes the motor housing, the dry air loads the gears with dust, and narrow installations leave little ventilation around the unit. When a motor in Lynwood hums but the gate does not move, the cause is often a failed capacitor, a stripped gear, or a control board that is no longer sending the right signal. A typical electric gate motor repair in Lynwood runs $285 to $680, with a full motor replacement on a heavy ornamental gate running higher when the rack, pinion, or underground drive must also be corrected.
Underground Operators on Tight Lynwood Lots
Many Lynwood estates and custom homes use underground operators for a clean look at the gate line. These units sit in a pit below the hinge post, so any service means working in a confined space beside the gate leaf. On lots where the opening is too narrow to remove the gate, we service the operator in position. We repair the rack and pinion drive, reseal the housing, and test the motor under full gate weight before we call the job done.
When the Motor Runs but the Gate Fails
If the motor spins and the gate stays put, the failure is usually mechanical, not electrical. A worn rack, a sheared key, or a coupling that has slipped will stop a functioning motor from moving the gate. We check the drive path from the motor output to the first moving part, then work outward to the gate itself. That sequence saves Lynwood homeowners from replacing a good motor and still having the same problem a month later.
Trusted Brands We Service in Lynwood
We work across the gate-automation industry, with factory-familiar knowledge of DoorKing, Elite, Mighty Mule, and LiftMaster systems, among others. Because gate repair is all we do, our trucks carry the control boards, receivers, photocells, and drive parts that Lynwood jobs commonly need. That means fewer return trips and faster turnaround on a gate that has been down for days. We do not steer a Lynwood homeowner away from a brand because we prefer another one. Automated or manual, we handle it.
Common Electric Gate Repair Problems We See in Lynwood Homes
- Hinge posts pushed by parkway tree roots and settling soil. A heavy bespoke swing gate goes out of plumb at the post, not the panel, and the sag returns every time someone only patches the frame. We re-set the post footing and correct the sag at the hinge point before touching the operator.
- Rusted welds on ornamental gates that were re-welded in place. Lynwood’s winter marine-layer damp attacks every exposed weld on older iron gates. Seasonal sticking and dragging are usually the first sign that a welded joint has started to fail at the ground line.
- Underground operators and loop detectors in narrow openings. Where a gate opening sits between shared block walls, there is no room to lift the gate out. A rack and pinion fault or a failing motor is hidden behind a panel that cannot be removed, so it must be diagnosed and repaired in position.
- Warped wooden gate leaves from inland basin heat. Dry summers bake wood gates on Lynwood’s older properties, pulling hinges out of alignment and changing the gate’s sweep path. We often realign hinges and adjust the operator’s limit settings to match the gate’s actual travel.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Lynwood, CA
Electric gate repair in Lynwood typically falls between $180 and $780 for a complete repair visit, labor and standard parts included. Keypad and remote control repairs run toward the low end, around $180 to $295. Motor repairs land between $285 and $680. Control board replacement on a Lynwood gate usually runs $320 to $565. Full automatic gate repair on a welded, ornamental swing gate can reach $780 when we are re-setting a post and rebuilding a welded stile in place. You will always get a written estimate before any work begins, and we set the price before we start. No surprises after the fact. Call (866) 569-6161 for a free estimate.
We Also Serve Cities Near Lynwood
Beyond Lynwood, our electric gate repair team covers Watts, Florence-Graham, Compton, and Carson. We know these blocks, their older gate configurations, and the tight property lines that shape how gates get built and repaired. If you are in Lynwood or a neighboring city, call us. We answer 24/7 and dispatch fast, Sunday through Friday.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lynwood
In Lynwood, the gate itself is usually the first problem. Dry summers warp wooden leaves and dry out hinges, while winter marine damp attacks rusted welds. A gate that drags because it is out of plumb will overload and eventually kill a good operator. We correct the gate’s physical movement before we blame the motor.
Yes. Most underground operators in Lynwood’s 90262 blocks sit in pits below gates that cannot be lifted out because the opening is too narrow between shared block walls. We service these units in position, replacing the rack and pinion drive, resealing the housing, and testing under full gate weight without removing the gate panel.
Your gate should reverse when the safety photocell or edge sensor is tripped, not after it has already pushed against an obstacle. On Lynwood properties with narrow gate openings, proper entrapment protection is essential because a heavy ornamental gate can crush with serious force. We test photocells, edge sensors, and the operator’s reversal logic on every automatic gate repair. If you are unsure whether yours is working, call us. We can test and adjust it.
Not always. A running motor does not mean the control board is good. We test the board’s outputs to the motor, the limit switches, and the accessory inputs before recommending replacement. Sometimes a relay or a limit setting is the real fault. We replace the board only when testing shows it is no longer sending the correct signal.
Most Lynwood slide gates use steel rack that has been welded or bolted to the inner frame for years. When the rack teeth wear, the operator’s pinion slips and the gate jumps. A bent track, a failed track wheel, or a sagging gate frame causes grinding. We repair the rack and track in position, because most Lynwood slide gates cannot be removed from their run without cutting the frame. Call (866) 569-6161 for an exact quote. Estimates are free.
Get Your Gate Working Again in Lynwood
If your electric gate is stuck, dragging, or refusing to close, call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We serve the tight lots, welded gates, and narrow openings across Lynwood with a repair-first approach that respects the gate you already have. The price is set before any work starts. Call now for a free estimate.
Written by Todd Conway, Owner at Gate Repair Compton, serving Lynwood since 2014.