Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pico Rivera
When a driveway gate stops opening or a pedestrian gate drags across the concrete, Pico Rivera homeowners need a fix that actually lasts. Our gate repair team works on the original iron, steel, and chain-link gates found throughout this mid-century tract suburb, where most houses were finished between the 1950s and 1970s. We know what those gates were hung with, how the anchors in stucco-over-block walls fail, and what a 45-year-old opener can and cannot do. Call (866) 569-6161 and we’ll get a technician out to look at it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Pico Rivera Homeowners Call Gate Repair Compton for Gate Repair
Gate repair is all we do. That matters in a place like Pico Rivera, where the housing stock is specific: 1950s-to-1970s single-story tracts on small lots, many with the original wrought-iron and chain-link gates still swinging on their first set of hinges. A general handyman treats a sagging gate as a hinge problem. We treat it as what it usually is here: anchor bolts that have pulled loose from aging stucco block, or a post that has slowly shifted under decades of Santa Ana wind loading. Todd Conway built this company around the gate trade specifically, and the difference shows up when we diagnose a problem in one visit instead of three.
We serve the whole city, from the blocks around the 90660 ZIP up through the older neighborhoods that feed into Whittier Boulevard. Homeowners call us because we speak the language of their specific gate: the brand, the operator board, the hinge style, the wall it’s mounted to. We’re not rearranging a truck full of general contractor gear. Gates are the entire job.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Pico Rivera
Gate welding in Pico Rivera is often the difference between salvaging a 50-year-old iron gate and paying for a full replacement. The original steel and wrought-iron gates on these tract homes were built heavy, but the welds at the hinge stubs, pickets, and corner joints crack over time, especially where the gate has been dragging and someone kept forcing it. We cut out the failed weld, clean the section back to sound metal, and re-weld it in place. The gate stays on its original hinges where possible, which preserves the look and the fit of the old opening. Typical welding repair on a Pico Rivera driveway gate runs $150 to $450, depending on how many joints need work and whether the gate has to come off its hinges to do it properly.
Wrought-Iron Crack Repair
Cracks at the bottom corner of a swing gate are common here because those corners take all the load when the gate dips and scrapes. We pull the gate back into alignment, weld the crack, and add a gusset plate where the design allows it so the same joint doesn’t fail again in two years.
Hinge Stub Reinforcement
When the weld between the hinge and the gate frame gives way, the gate cocks to one side and the latch stops lining up. We re-weld the stub and often add a backing plate to spread the load across more of the frame rail. It’s a stronger connection than the original.
Commercial Gate Repair in Pico Rivera
Commercial gate repair in Pico Rivera covers the sliding and swing gates on light-industrial lots, auto shops, storage yards, and the small commercial strips that line the older corridors. These gates run on operators that get cycled dozens of times a day, and when they fail, it stops business. We work on DoorKing, LiftMaster, Elite, and most other commercial operator brands, and we diagnose by brand logic rather than guessing at a generic fix. Typical commercial gate repair here runs $250 to $900, with operator board replacement or motor work at the higher end. The written estimate sets the final price before anything is touched.
Slide Gate Track and Roller Repair
Slide gates on commercial properties seize when the rollers flatten, the track fills with debris, or the gate gets hit and jumps the rail. We check the rollout path, replace worn rollers, and re-set the gate so the operator isn’t fighting the load.
Operator and Safety Loop Issues
Older commercial operators often lose their safety loops or have control boards that are too old to support modern sensors. We can retrofit photocells and loop detectors onto many existing boards, or replace the board when it’s past that point. Gate quotes are free, so you know the number before you commit.
Trusted Brands We Service in Pico Rivera
We work on the brand you already have. Around Pico Rivera that means a lot of original LiftMaster and Mighty Mule operators on residential driveways, plus DoorKing and Elite units on commercial gates. Our technicians are familiar with the control logic, wiring layouts, and common failure points across these brands, which cuts the diagnostic time way down. Because gates are our only trade, we keep the common boards, remotes, photocells, and hinge hardware on the truck rather than telling you we’ll order a part and come back next week. If your operator predates modern safety sensors, we can talk honestly about what’s worth retrofitting and what isn’t.
Common Gate Repair Problems We See in Pico Rivera Homes
- Anchor bolts pulling out of stucco-over-block walls. On the older blocks, driveway gates are hung from walls rather than freestanding posts. Santa Ana winds work those anchors loose year after year, and the gate starts sagging into the driveway.
- Heat-cycled operator boards from 1970s-era openers. San Gabriel Valley summers bake the original control boards, and many have no modern safety inputs at all. Some can be retrofitted with sensors; others are past the point where throwing parts at them makes sense.
- Rusted chain-link pedestrian gates seizing at the hinges. Original chain-link posts corrode, the gate binds, and forcing it bends the frame or the operator arm if one’s installed. Replacing the hinge hardware and re-hanging the gate usually solves it without replacing the whole opening.
- Wood and vinyl gates warping from heat and dry air. These gates swell and bind in the dry summers, especially where they’re painted dark and get full afternoon sun. Realignment and hinge adjustment get them clearing the walkway again.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Pico Rivera, CA
We quote every job up front, in writing, before any work starts. Here’s what we see in the Pico Rivera market for the most common calls: hinge replacement or re-hanging a sagging gate runs $180 to $400. Welding repair runs $150 to $450 depending on the number of joints. Operator board replacement or motor work runs $250 to $700 on residential units, and commercial slide gate work typically runs $250 to $900. Full automatic gate installation on a new opening starts around $1,800 and moves up with gate size, operator brand, and whether we’re anchoring into block wall or setting new posts. The estimate is free, and it’s the number you’ll pay.
We Also Serve Cities Near Pico Rivera
Our service area around Pico Rivera includes Gate Repair calls in Whittier, South Whittier, Monterey Park, and Lynwood. If you’re on the edge of town or just over the line into a neighboring city, call (866) 569-6161 and we’ll let you know our availability. We answer 24/7.
Key Takeaways for Pico Rivera Gate Repair
- Most Pico Rivera gate failures are retrofit jobs on 40-to-50-year-old iron and hardware, not new installations.
- Sagging gates here usually mean the anchor bolts in stucco-over-block walls have pulled loose, not just a hinge swap.
- We’re factory-familiar with LiftMaster, Mighty Mule, DoorKing, Elite, and other major brands.
- Free written estimate before any work begins. Typical hinge and re-hang work runs $180 to $400.
- Call (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pico Rivera
Sometimes yes, but on Pico Rivera’s older tract homes the real problem is usually the post or the anchor bolts in the stucco-over-block wall, not the hinges themselves. Replacing hinges on a gate whose post has shifted just transfers the load to fresh hardware that will fail again. We check the post footing, the wall anchors, and the gate’s alignment first. If it’s just worn hinge pins, a hinge replacement runs $180 to $400 and is usually done in one visit. Call (866) 569-6161 for a free estimate.
In many cases yes, but it depends on the control board. Some original boards on LiftMaster and other residential operators from that era can accept modern photocells and loop detectors as add-ons. Others are too old and the board has to be replaced before any safety input will work. We’ll tell you which situation you have after we look at the unit. The safety retrofits are worth doing on any gate that opens over a sidewalk or where kids are around. Call (866) 569-6161 and we’ll assess it in person.
Yes, and this is one of the most common calls we get in the 90660 and 90661 areas. We strip the rust at the working joints, re-weld any cracked sections, replace the hinge hardware if it’s corroded, and re-hang the gate so it clears the driveway. Typical welding and re-hang work runs $150 to $450. On a recent 90660 job we re-hung a 45-year-old wrought-iron swing gate that had been dragging for months, reset the post footing, and added a modern LiftMaster operator with safety photocells. The gate cleared the driveway cleanly the same day.
Yes. We repair and service sliding and swing gates on commercial properties around Pico Rivera, including auto shops, storage lots, and small industrial yards. We work on DoorKing, Elite, LiftMaster, and other commercial operator brands, and we can retrofit safety loops and photocells onto many older systems. Commercial gate repair here typically runs $250 to $900 depending on the operator and the extent of the mechanical work. Call (866) 569-6161 to schedule a commercial gate assessment.
Anchor failures on stucco-over-block walls. Pico Rivera’s 1950s-to-1970s homes often have driveway gates mounted directly into masonry walls rather than freestanding posts, and those original anchor bolts corrode and pull loose with time and Santa Ana wind loads. The gate sags, the hinges bind, and the operator starts struggling. A proper fix means resetting the anchors or the post footing, not just bolting the same hardware back into the same failing wall. We do that repair more than any other in this city.
Call Gate Repair Compton for Your Pico Rivera Gate
If your gate is sagging, bound up, or stuck halfway open, call us at (866) 569-6161. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll give you an honest assessment of what can be repaired versus what should be replaced, and the written estimate sets the price before anything gets started. Gate repair is all we do, and in Pico Rivera that means we know exactly what’s holding your gate up, or what’s not.
Written by Todd Conway, Owner at Gate Repair Compton, serving Pico Rivera since 2014.