Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Compton, CA
Gate installation in Compton usually means securing a driveway or front yard on a compact lot where the gate is the first line of defense, not an afterthought. Most homes here were built between the 1920s and 1960s, so we’re typically working with stucco bungalows, Spanish Colonial cottages, and original ironwork that has seen decades of Compton sun. We’re a gate-only company, which means every job we take is about getting your property secured and your gate working right. If you have questions, call (866) 569-6161 and we’ll walk you through what you’re dealing with.
Why Compton Homes Are Different
Compton’s housing stock shapes almost every gate call we make. The city is dominated by single-story stucco bungalows and Spanish Colonial cottages built from the 1920s through the 1960s, most sitting on small lots with front-facing driveways rather than attached garages. That means the gate across the driveway or the pedestrian gate at the side of the house is doing serious security work. It’s not decorative. When a latch fails or a hinge sags, the yard is open to the street, and homeowners here treat that as an active problem, not a cosmetic one.
The original ironwork on many of these homes was welded steel, and it’s often worth saving. Repairs in Compton frequently mean re-hanging a heavy, decades-old gate rather than swapping it for a lightweight prefab panel. Older masonry pilasters and settled concrete posts don’t always hold anchors the way fresh concrete does, so securing hardware into aging stucco and concrete is part of the job. Add Compton’s dry, warm Mediterranean climate with intense summer sun, and unpainted iron rusts faster than people expect. The occasional heavy winter rain swells wooden gates and loosens footings. We plan for all of that on every install and repair.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Compton Services
Most Call Compton homeowners reach out for one of two reasons: an existing gate has stopped working, or an electric gate has failed at the worst possible time. Here’s what each service covers.
Gate Repair in Compton
A sagging weld, a hinge pulling out of a stucco post, a latch that won’t catch. On Compton’s older homes, these failures usually involve original steel and wrought iron that’s worth repairing rather than replacing. We re-weld frames, re-anchor into settled concrete, and realign swing gates so they close square. If your gate isn’t latching or the frame is pulling off its hinges, this is the service you need. Details on what we fix and typical pricing are on the Gate Repair in Compton page.
Electric Gate Repair in Compton
Automated gates fail in specific ways: a motor that hums without moving, a keypad that stopped reading codes, a safety sensor that keeps the gate from closing, or an opener that trips its breaker. We diagnose by brand logic, which means we trace the failure through the control board, limit switches, and power supply rather than guessing. If your electric gate won’t open, won’t close, or reverses mid-cycle, read the Electric Gate Repair in Compton page for what a diagnostic visit involves.
Gate Installation in Compton
New gate installation in Compton usually involves replacing a rusted or unsafe gate with a properly hung, securely anchored system that matches the look of a 1920s – 1960s stucco home. We measure, order or fabricate, set posts at the right depth, and either install a manual gate or wire a full automated system, because many Compton driveways were built without the power and conduit an electric gate needs. The climate here means we use corrosion-resistant hardware and heavy-gauge steel that handles the summer sun without warping. For details on the full Gate Installation service, read below.
Automatic Gate Installation
Signs you need it
A driveway that’s open all day, an existing gate you’re tired of opening by hand, or a commercial property that needs controlled entry.
What it costs in Compton
Typical automatic gate installation in Compton runs $2,800 – $7,500 depending on gate size, operator type, and whether new power has to be pulled to the location.
How we do it
We confirm the gate is hung square, mount the operator and control box, run or verify the power supply, install safety edges and photo sensors, then program remotes and keypads.
Driveway Gate Installation
Signs you need it
The old gate is too rusted or bent to repair safely, the post has shifted so the gate drags, or you want a first-time gate across a front driveway.
What it costs in Compton
A manual driveway gate with posts and hardware typically runs $1,800 – $5,000 in Compton, with automation adding $1,000 – $2,500 to the total.
How we do it
We dig and set posts at proper footing depth in the clay-heavy soil around Compton, hang the gate, then weld or bolt hardware so it swings balanced and latches clean.
What Gate Installation Costs in Compton
| Item | Typical range in Compton |
|---|---|
| Manual gate installation | $1,100 – $3,500 |
| Automatic gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,000 – $7,000 |
Does a new gate in Compton need a permit?
Most cities treat a gate as a fence, and Compton is no exception. Height and setback rules can apply, so the safe move is to call the city’s building department before we start and confirm what your specific lot requires. We build to the approved spec.
How long does a gate installation take in Compton?
A simple manual gate on existing posts can go up in a day. An automatic driveway gate with new posts, power, and concrete curing usually takes one to three days. We give you a written schedule with the estimate, and the price is fixed before work starts.
Brands We Service in Compton
We work on the brand you already have. Our technicians are factory-familiar with DoorKing, Elite, Mighty Mule, and LiftMaster, plus the rest of the major gate-automation lines, which means we diagnose by that brand’s specific logic instead of swapping parts on a hunch. We keep common boards, remotes, and sensors stocked locally so turnaround is days, not weeks. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Compton, CA
| Service | Typical range in Compton |
|---|---|
| Gate repair | $120 – $650 |
| Electric gate repair | $180 – $2,400 |
| Manual gate installation | $1,100 – $3,500 |
| Automatic gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,000 – $7,000 |
| Gate operator motor replacement | $500 – $2,000 |
| Gate keypad and receiver replacement | $200 – $800 |
| Wrought iron and steel gate repair | $150 – $650 |
Prices in Compton push higher when a job involves heavy original wrought iron that needs re-welding, settled concrete posts that require re-anchoring, or a long power run to a driveway that was never wired for automation. Every job is quoted from a free on-site look, and that written estimate is the price you pay before any work begins.
Neighborhoods We Serve in Compton
We take calls from every corner of Compton, from the blocks around the Civic Center down to the streets near the 91 and across to the city’s eastern edge. Most of our dispatches within city limits reach the property same-day if the call comes in before late afternoon.
- Richland Farms
- Sunny Cove
- City Center
- East Compton
- Civic Center area
Service Area – Cities Near Compton
We extend the same gate-only service into the surrounding communities. If you’re in Carson, CA, Lynwood, CA, Watts, CA, or Torrance, CA, call for a free estimate and we’ll send a technician out on the same dispatch schedule.
Serving Compton, CA – Our Local Coverage Area
We serve Compton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Compton
Call (866) 569-6161. We answer 24/7 and dispatch technicians from 7am to 7pm, Sunday through Friday. Same-day service is available for most gate repairs in Compton when the call comes in during dispatch hours. A call outside those hours gets booked into the next opening.
Some Compton subdivisions have covenants that govern fence and gate height, materials, and color. Before you order a gate, check your HOA documents or ask the association management company. We build to whatever spec your HOA or the city requires, and we’ll wait for the approval before fabricating.
We serve all of Compton plus the neighboring cities listed above: Carson, Lynwood, Watts, and Torrance. If you’re just over the line and aren’t sure, call (866) 569-6161 and tell us the address. If it’s within our service area, we’ll schedule the visit. The estimate is free.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Compton Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Elena Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Elena Flores"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Jessica Chen