Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Compton?
Gate installation in Compton typically runs $1,800 to $5,500 for a residential driveway gate with a standard electric operator, and $1,200 to $2,800 for a manual walkway gate. The final number depends on gate width, material, and whether the operator needs new wiring run to the gate.
We’re a gate-only company, not a general contractor who installs a gate once a month. That focus means we’ve quoted enough jobs in the Compton area to give you a real range before anyone comes out. Call (866) 569-6161 and we’ll talk through what you’re working with.
Gate Installation Cost Breakdown (2026)
Here’s how a typical Compton installation breaks down line by line. These are estimated ranges for the local market in 2026. Your written estimate sets the final price.
| Line Item | Typical Range |
|---|---|
| Walkway gate (manual, 3-4 ft) | $700 – $1,800 |
| Driveway gate (manual, single swing) | $1,200 – $2,800 |
| Driveway gate (manual, double swing) | $2,000 – $4,200 |
| Sliding gate (manual) | $2,200 – $4,800 |
| Electric operator (single swing) | $1,100 – $2,400 |
| Electric operator (double swing or slide) | $1,600 – $3,200 |
| New power run to gate location | $400 – $1,500 |
| Access control (keypad, remote, intercom) | $250 – $1,200 |
| Safety sensors and loop installation | $300 – $900 |
| Post footing and concrete work | $350 – $1,100 |
Add those up and a fully automated double driveway gate in Compton generally lands between $4,500 and $8,000 all-in. The spread is wide because a gate on a flat, accessible driveway with power already nearby is a different job than a slope with hard-packed soil and a 60-foot run from the panel.
What pushes the number up: wider openings, custom fabrication, heavy materials like wrought iron, long power runs, and any grading or concrete that needs to happen first. What pulls it down: sticking with standard sizes, keeping the gate near existing power, and choosing a manual gate if you don’t actually need automation.
What Affects Gate Installation Pricing in Compton
- Gate width and weight. A wider gate needs heavier posts, stronger hinges, and a bigger operator if it’s automated. A 16-foot double gate costs meaningfully more than an 8-foot walkway gate because the whole hardware set scales up.
- Material choice. Ornamental steel and wrought iron cost more than aluminum or wood up front, but they hold up longer in Southern California’s dry summers and mild winters. Wood needs more attention over time.
- Power proximity. If your driveway gate location has no existing electrical supply, running power is a real line item. It’s also the one part of the job where we recommend an electrician handle the actual hookup to your panel.
- Ground conditions. Compton yards are often older lots with established concrete, roots, or compacted soil. Posts need proper footing depth regardless, and if we hit something unexpected under the surface, that work gets quoted before we keep going.
- Operator brand and features. A basic operator from Mighty Mule or Linear is a different price than a commercial-grade LiftMaster or DoorKing system with access control built in. We work across all of them, so we match the operator to how you actually use the gate. A single homeowner who opens the gate once a day doesn’t need the same operator as a small commercial lot with dozens of daily entries.
- Permits and HOA requirements. Most cities require a permit for a gate on a driveway or near a property line, and some Compton properties fall under HOA rules. Ask your city’s building department and check your HOA covenants before ordering materials; permit costs and requirements vary and aren’t something we can quote for you.
How to Save on Gate Installation
There’s no way around the fact that a gate costs money. But there are real ways to keep it reasonable.
- Repair before you replace. If you have an existing gate that’s sticking, sagging, or an operator that quit, get it looked at first. We lead with repair for a reason: a lot of gates we’re called out to “replace” just need hinges, posts re-set, or an operator board. That’s a fraction of new-install money.
- Reuse a working operator. If your current operator is still good, we can often build the new gate around it. Match the gate weight and width to what the operator can handle.
- Choose standard sizing. Custom fabrication adds cost. A standard-width gate off the shelf, installed correctly, usually beats a custom build on price.
- Keep power close. If you’re planning a layout, put the gate where power already exists. A shorter power run saves real money.
- Go manual if automation isn’t needed. Not every property needs an electric gate. A well-hung manual gate can last years with minimal upkeep.
Get a free estimate before you commit to anything. Call (866) 569-6161 and we’ll tell you straight whether repair or replacement makes more financial sense for your gate.
Manual vs. Electric Gate: Which Costs Less Up Front?
A manual gate costs less up front by a wide margin. A manual driveway gate in Compton typically starts around $1,200 to $2,800, while adding an electric operator and the associated wiring pushes the same job to $4,000 and up. The gap is real.
But the calculation isn’t only up-front. Electric gates add convenience and access control, which matters if you have a long driveway, mobility concerns, or a property that needs controlled entry. For a small commercial lot, an electric gate with a keypad or intercom often pays for itself in access management. For a quiet residential driveway where you get out to open the gate anyway, a manual gate may be the more sensible choice.
We install both. Tell us how the gate gets used and we’ll give you the honest math. From a single broken hinge to a full electric-gate installation, it’s the same conversation.
Does an Electric Gate Cost More to Install Than a Manual Gate?
Yes, and the difference is usually $1,600 to $3,200 or more depending on the operator and wiring. An electric gate carries a few cost layers a manual gate doesn’t: the operator unit itself, low-voltage or line-voltage wiring run to the gate, safety sensors required on most automated gates, and sometimes access control hardware.
Operator brands vary significantly in price and capability. A residential LiftMaster swing operator is priced differently than a DoorKing slide gate system built for a commercial lot, and the right pick depends on gate weight, duty cycle, and how often it opens. Because we service and install across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we’re not locked into one manufacturer’s pricing or one product line. We match the operator to your gate and your use.
The thing to understand about electric gate installation is that the electrical hookup to your home’s panel is a job for a licensed electrician. It’s a genuine safety matter: gate operators run on line voltage, and DIY panel work can seriously injure you or worse. A gate technician handles the mechanical install and the operator setup; the panel connection should go to an electrician. We’ll tell you exactly what needs to happen and in what order.
Can You Install a Gate On an Existing Opening?
Usually, yes. If you have an existing gate opening with sound posts, we can often install a new gate leaf and hardware without tearing out the whole structure. The posts need to be solid and the footing needs to be sound; if they’re not, that gets identified before we start.
A gate install on an existing opening is common for homeowners who want to upgrade from a flimsy gate to something sturdier, or who want to add an operator to a gate that was installed as manual. It’s typically faster and less expensive than a full new opening. We look at post condition, footing, and the width of the opening first. If the existing posts are failing, we tell you; if they’re solid, we build on them.
If you’re not sure whether your opening needs a full rebuild or just a new gate leaf, that’s a quick assessment. Call (866) 569-6161 and describe what you have.
What Happens When You Call
You call, we ask questions about the gate and the opening, and then we set up a free on-site estimate. During that visit we measure the opening, check post and footing condition, check for power near the gate, and then give you a written estimate that breaks down the parts and labor. No surprise line items afterward.
The estimate is free, and the written estimate sets the final price. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a gate that fails on a Saturday can call and we’ll book it into the next opening.
Same-day service is sometimes possible on repairs. For installation, the timing depends on materials and permit requirements, and we’ll tell you that upfront.
FAQs – Gate Installation Cost
How much does gate installation cost in Compton?
Gate installation in Compton typically costs $1,800 to $5,500 for a residential driveway gate with a standard electric operator. Manual walkway gates generally run $1,200 to $2,800, and a full double automated driveway gate can land between $4,500 and $8,000 all-in. Call (866) 569-6161 for an exact quote; estimates are free.
Is it cheaper to repair or replace my gate?
Repair is usually cheaper if the gate leaf and posts are still structurally sound. Hinge, latch, and operator-board repairs run a fraction of the cost of a new install, and that’s the first thing we check. If the posts are failing or the gate is bent beyond safe repair, replacement wins on cost over time. Call (866) 569-6161 and we’ll tell you which one you’re facing.
How much does an electric gate operator cost in Compton?
A single swing electric operator typically runs $1,100 to $2,400 in Compton, and a double swing or slide operator runs $1,600 to $3,200. Adding access control and safety sensors pushes the total up further. We install and service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Call (866) 569-6161 for an operator quote.
Do I need a permit to install a gate in Compton?
Most cities require a permit for a gate on a driveway or near a property line, so check with Compton’s building department before ordering materials. Permit requirements and costs vary, and your HOA may have additional rules. We can tell you what the installation itself involves, but the permit is your call to make with the city. Call (866) 569-6161 with questions about the install.
Can you come today for a gate estimate?
Same-day estimates are often possible with fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7, and a call outside dispatch hours gets booked into the next opening. We’re closed Saturday. Call (866) 569-6161 to get on the schedule.
Get Your Gate Installed Right the First Time
Gate installation is one of those jobs where getting it right from the start saves you money for years. Posts that aren’t set to proper footing depth, hinges that aren’t aligned, operators sized wrong for the gate weight – all of it shows up later as repairs. We’ve been doing gate repair and installation in Compton since 2014, and we’ve seen what goes wrong when a gate is installed as an afterthought.
Whether you need a new manual gate, an electric upgrade, or you just want a straight answer on whether your current gate is worth repairing, call (866) 569-6161. We answer 24/7, dispatch runs 7am to 7pm Sunday through Friday, and estimates are free. You’ll get a written quote that tells you exactly what you’re paying for before any work starts.
For more on our full range of services in the area, see gate repair Compton and our Compton service information.
Pricing reflects the Compton market as of 2026. Gate Repair Compton offers free estimates – call (866) 569-6161.
What Our Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Maria Delgado"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Gabriela Castillo"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Gilbert Herrera